Midnite Solar
Midnite Solar Lightning and Surge Arrestor 600DC (MNSPD-600)
Midnite Solar Lightning and Surge Arrestor 600DC (MNSPD-600)
Couldn't load pickup availability
The MidNite Solar MNSPD-600 is a DC surge protection device that shunts lightning-induced and switching surges away from your inverter, charge controller, and other sensitive DC equipment — cheap insurance against a single close lightning strike destroying thousands of dollars in solar electronics. Install it at the combiner box, inverter, or charge controller DC input for the best protection.
Key Specs:
- Nominal Voltage Range: 0-485VAC / 0-640VDC
- Max Continuous Operating Voltage (MCOV): 780V (702-858V)
- Peak Current: 115kA (full device) / 57.5kA (each section)
- Energy Absorption: 4320J (full device) / 2160J (each section)
- Response Time: <1 microsecond
- Operating Temperature: -40°C to +85°C
- Indicators: Dual operating LEDs
- Protection: Internal thermal disconnect
Rated for both indoor and outdoor installation. Pair with an AC-side arrestor (like the MNSPD-300-AC) for complete surge protection on both the DC and AC sides of your system.
Documents
- MidNite SPD Spec Sheet (MNSPD-115/300AC/300DC/600) (PDF · source: midnitesolar.com)
- SPD Installation Manual (MNSPD-115/300AC/300DC/600) (PDF · source: midnitesolar.com)
Documents are published by the manufacturer and hosted here for convenience. Always check the manufacturer's site for the latest revision.
Share
