Victron SmartSolar MPPT 150/100-MC4 VE.Can Solar Charge Controller

The Victron SmartSolar MPPT 150/100-MC4 VE.Can is the largest 150V SmartSolar: up to 100A of charge current, with three pairs of MC4 connectors on the PV input so you can land several strings without splitters. Two VE.Can ports let you daisy-chain up to 25 controllers that charge in sync and report individually to a Cerbo GX or other GX device. Bluetooth is built in, and it runs fanless.

Key Specs:

• Battery Voltage: 12/24/48V auto select (36V manual)
• Rated Charge Current: 100A
• Nominal PV Power: 1450W (12V) / 2900W (24V) / 4350W (36V) / 5800W (48V)
• Max PV Open Circuit Voltage: 150V (145V start-up and operating max)
• Max PV Short Circuit Current: 70A (max 30A per MC4 connector)
• PV Connection: three pairs of MC4 connectors
• Max Efficiency: 98%
• Communication: VE.Can (x2), VE.Direct, Bluetooth; remote on/off; programmable relay
• Parallel Operation: up to 25 units over VE.Can, 10 over Bluetooth
• Protection: IP43 electronics, IP22 connection area
• Dimensions: 246 x 295 x 103 mm (9.7 x 11.6 x 4.1 in)
• Weight: 4.5 kg (9.9 lb)
• Certifications: UL 1741, CSA C22.2, EN/IEC 62109-1
• Part Number: SCC115110511

Prefer screw terminals? See the 150/100-Tr VE.Can.