Victron SmartSolar MPPT 250/100-MC4 VE.Can Solar Charge Controller

The Victron SmartSolar MPPT 250/100-MC4 VE.Can is the largest of Victron's standard SmartSolar line: 250V input and up to 100A of charge current, with three pairs of MC4 connectors so you can land several strings without splitters. Two VE.Can ports let up to 25 controllers be daisy-chained to charge in sync and report individually to a Cerbo GX or other GX device. Bluetooth is built in, and it runs fanless.

Key Specs:

• Battery Voltage: 12/24/48V auto select (36V manual)
• Rated Charge Current: 100A
• Nominal PV Power: 1450W (12V) / 2900W (24V) / 4350W (36V) / 5800W (48V)
• Max PV Open Circuit Voltage: 250V (245V start-up and operating max)
• Max PV Short Circuit Current: 70A (max 30A per MC4 connector)
• PV Connection: three pairs of MC4 connectors
• Max Efficiency: 99%
• Communication: VE.Can (x2), VE.Direct, Bluetooth; remote on/off; programmable relay
• Parallel Operation: up to 25 units over VE.Can, 10 over Bluetooth
• Protection: IP43 electronics, IP22 connection area
• Dimensions: 246 x 295 x 103 mm (9.7 x 11.6 x 4.1 in)
• Weight: 4.5 kg (9.9 lb)
• Certifications: UL 1741, CSA C22.2, EN/IEC 62109-1
• Part Number: SCC125110512

Prefer screw terminals? See the 250/100-Tr VE.Can. Building a large 48V system? See the SmartSolar MPPT RS 450/100.