Victron SmartSolar MPPT 250/60-Tr Solar Charge Controller

The Victron SmartSolar MPPT 250/60-Tr accepts up to 250V from your solar array and delivers up to 60A to a 12, 24, 36 or 48V battery bank. The higher input voltage lets you run long series strings, so you need fewer, thinner wires between the array and the controller, which is ideal for ground mounts and cabins with a long run to the battery room. Bluetooth is built in, it runs fanless, and up to 10 units can be synchronized over Bluetooth. Screw terminals (Tr) take PV wire up to 2 AWG.

Key Specs:

• Battery Voltage: 12/24/48V auto select (36V via software)
• Rated Charge Current: 60A
• Nominal PV Power: 860W (12V) / 1720W (24V) / 2580W (36V) / 3440W (48V)
• Max PV Open Circuit Voltage: 250V (245V start-up and operating max)
• Max PV Short Circuit Current: 35A
• PV Connection: screw terminals, 35 mm² / 2 AWG
• Max Efficiency: 99%
• Communication: Bluetooth, VE.Direct; remote on/off; programmable relay
• Protection: IP43 electronics, IP22 connection area
• Dimensions: 185 x 250 x 95 mm (7.3 x 9.8 x 3.7 in)
• Weight: 3 kg (6.6 lb)
• Certifications: UL 1741, CSA C22.2, EN/IEC 62109-1
• Part Number: SCC125060221

Prefer plug-in panel leads? See the 250/60-MC4. Need more current? See the 250/70-Tr.