Victron SmartSolar MPPT 150/70-MC4 VE.Can Solar Charge Controller

The Victron SmartSolar MPPT 150/70-MC4 VE.Can is the 150/70 VE.Can with two pairs of MC4 connectors on the PV input, so panel leads plug straight in. Two VE.Can ports let you daisy-chain up to 25 controllers that charge in sync and report individually to a Cerbo GX or other GX device. Bluetooth is built in for setup with VictronConnect, and it runs fanless.

Key Specs:

• Battery Voltage: 12/24/48V auto select (36V manual)
• Rated Charge Current: 70A
• Nominal PV Power: 1000W (12V) / 2000W (24V) / 3000W (36V) / 4000W (48V)
• Max PV Open Circuit Voltage: 150V (145V start-up and operating max)
• Max PV Short Circuit Current: 50A (max 30A per MC4 connector)
• PV Connection: two pairs of MC4 connectors
• Max Efficiency: 98%
• Communication: VE.Can (x2), VE.Direct, Bluetooth; remote on/off; programmable relay
• Parallel Operation: up to 25 units over VE.Can, 10 over Bluetooth
• Protection: IP43 electronics, IP22 connection area
• Dimensions: 215 x 250 x 95 mm (8.5 x 9.8 x 3.7 in)
• Weight: 3 kg (6.6 lb)
• Certifications: UL 1741, CSA C22.2, EN/IEC 62109-1
• Part Number: SCC115070511

Prefer screw terminals? See the 150/70-Tr VE.Can.