Victron SmartSolar MPPT 150/70-Tr VE.Can Solar Charge Controller

The Victron SmartSolar MPPT 150/70-Tr VE.Can is the 150/70 with two VE.Can ports added. VE.Can lets you daisy-chain up to 25 controllers so they charge in sync and report individually to a Cerbo GX or other GX device on one cable, which is the clean way to build large or multi-array systems. Bluetooth is built in for setup with VictronConnect, it runs fanless, and screw terminals take PV wire up to 2 AWG.

Key Specs:

• Battery Voltage: 12/24/48V auto select (36V manual)
• Rated Charge Current: 70A
• Nominal PV Power: 1000W (12V) / 2000W (24V) / 3000W (36V) / 4000W (48V)
• Max PV Open Circuit Voltage: 150V (145V start-up and operating max)
• Max PV Short Circuit Current: 50A
• PV Connection: screw terminals, 35 mm² / 2 AWG
• Max Efficiency: 98%
• Communication: VE.Can (x2), VE.Direct, Bluetooth; remote on/off; programmable relay
• Parallel Operation: up to 25 units over VE.Can, 10 over Bluetooth
• Protection: IP43 electronics, IP22 connection area
• Dimensions: 185 x 250 x 95 mm (7.3 x 9.8 x 3.7 in)
• Weight: 3 kg (6.6 lb)
• Certifications: UL 1741, CSA C22.2, EN/IEC 62109-1
• Part Number: SCC115070411

Don't need VE.Can? See the 150/70-Tr. Prefer MC4 inputs? See the 150/70-MC4 VE.Can.